PCI HPDC-3.00 Roller Bearings

T:160.34 mm; Mass bearing:15.5 kg; Thrust factor K:1.74; Calculation factor Y1:2; Design variant/feature:TQO/GWI; Basic dynamic load rating C:858 kN; Fatigue load limit Pu:204 kN; Comparative axial load rating CFa:41.4 kN; r3,4 min.:3.3 mm; Calculation factor e:0.33;

w:55 mm; α:7 °; d:45 mm; l7 min.:48 mm; Basic static load rating C0:224 kN; B:32 mm; C1 max.:28 mm; Basic dynamic load rating C:127 kN; l4 max.:219 mm; dk:60 mm;

Grease:7 100 min-1; B:25 mm; ra:1.5 max; d:45 mm; Static (Cor):31.715 kN; Pu:1.442 kN; D:100 mm; Weight:0.828 kg; Da:91 max; da:52 min;

B:16 mm; Mass inner ring:0.018 kg; F:26 mm; d:22 mm; r, r1,2 min.:0.3 mm;

Length H:0.500 in; Shaft C/L Distance F:1 2/5 in; Travel:6; Bolt Pattern E:9 1/2 in; Frame Size A:4 1/8 in; Height G:2.938 in; Frame Accepts These Shaft Sizes (Bearing Bore):20 mm, 25 mm; Frame Size B:11 in; Bolt Pattern C:0.55 in; Bolt Pattern D:2 1/4 in;

Basic Dynamic Radial Load Rating C:21000 N; B:25.40 mm; Sealed Speed Rating n3:7500 rpm; Accessories:Synthetic Rubber Sea; D:62.0000 mm; Basic Static Radial Load Rating Co:11000 N; Oil Speed Rating Open/Shielded n2:14000 rpm; d:25.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius

A:35.7 mm; H:155.6 mm; L:92.1 mm; B:42.9 mm; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, mm G:12 mm; Housing:FYTWR 507 Y; A5:30.5 mm; Fatigue load limit Pu:0.655 kN; Basic dynamic load rating C:21.6 kN;

Limiting speed:750 r/min; ra max.:2.5 mm; H:73 mm; da min.:699 mm; D1 ≈:634 mm; Minimum load factor A:83; Basic static load rating C0:4000 kN; Basic dynamic load rating C:540 kN; Mass bearing (including seat washer where applicable):62.5 kg; r1,2 min.:3 mm;

E:129.6 mm; Reference speed:2000 r/min; Calculation factor kr:0.25; D:140 mm; Da max.:134 mm; s max.:2 mm; d:100 mm; Mass bearing:1.9 kg; r1,2 min.:1.1 mm; Limiting speed:2600 r/min;

H1:95.25 mm; P120°:31.6 kN; H2:31.75 mm; J max.:279.4 mm; P90°:50.7 kN; Adapter sleeve assembly:SNW 17x2.15/16; Cap bolt, SAE grade:5; R1:53.975 mm; da:74.612 mm; Ca:45.796 mm;

Grease Speed Rating n1:1800 rpm; d:90.000 mm; B:98.40 mm; Basic Static Radial Load Rating Co:300000 N; D:225.0000 mm; Basic Dynamic Radial Load Rating C:281000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2600 rpm;

Basic static load rating C0:73500 kN; T:844.55 mm; Calculation factor Y2:3.3; Calculation factor Y0:2.2; Design variant/feature:TQOS/GWISI; r3,4 min.:12.7 mm; Comparative radial load rating CF:6700 kN; Comparative axial load rating CFa:1030 kN; D1 ≈:1050 mm; r1,2 min.:4.8 mm;

Tolerance shaft:e7; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; B:60 mm; D:150 mm; Coefficient of friction µ min.:0.08; a:3 mm; Tolerance housing:H7; Mass bushing:2.65 kg; Specific static load factor K0:45 N/mm²;

d:70.000 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:80000 N; Oil Speed Rating n2:5600 rpm; B:40.00 mm; Grease Speed Rating n1:4800 rpm; D:110.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:68900 N;

Dynamic (Cr):9 mm; Pu:2100 kN; D:460 mm; rs (min):4 mm; with tapered bore:1 000 min-1; Oil:303.940 kN; Static (Cor):16.7 mm; B:118 mm; Grease:3720 kN; with cylindrical bore:800 min-1;